Quad Bikes | Moto-X Bikes | ATV's
Mini | Choppers | Motor Bikes
Quads - Four wheelers
Suzuki was a leader in the development of 4-wheeled ATVs. It sold the first ATV, the 1983 QuadRunner LT125, which was a recreational machine for beginners.
In 1985, Suzuki introduced to the industry the first high-performance 4-wheel ATV, the Suzuki LT250R QuadRacer. This machine was in production for the 1985-1992 model years. During its run, it underwent three major engineering makeovers. However, the major core features were retained. These were: a sophisticated long-travel suspension, a liquid-cooled two-stroke motor and a fully manual 5-speed transmission for 85-87 models and a 6-speed transmission for the 88-92 models. It was a machine exclusively designed for racing by highly skilled riders. Honda responded a year later with the FourTrax TRX250R - a machine that has not been replicated. Kawasaki responded with its Tecate-4 250. In 1987, Yamaha introduced a different type of high-performance machine, the Banshee 350, which featured a twin-cylinder liquid-cooled two-stroke motor from the RD350LC street motorcycle. Heavier and more difficult to ride in the dirt than the 250s, the Banshee became a popular machine with sand dune riders thanks to its unique power delivery. The Banshee remains hugely popular, but 2006 is the last year it will be available in the U.S. (due to EPA emissions regulations). In Canada, however, the Banshee will be back for the 2007 model year, still featuring the same parallel-twin, 350cc, two-stroke engine that made the machine famous.
At the same time, development of utility ATVs was rapidly escalating. The 1986 Honda FourTrax TRX350 4x4 ushered in the era of four-wheel drive ATVs. Other manufacturers quickly followed suit, and 4x4s have remained the most popular type of ATV ever since. These machines are popular with hunters, farmers, ranchers and workers at construction sites.
Safety issues with 3-wheel ATVs caused all manufacturers to switch to 4-wheeled models in the late '80s, and 3-wheel models ended production in 1987, due to consent decrees between the major manufacturers and the Consumer Product Safety Commission -- the result of legal battles over safety issues among consumer groups, the manufacturers and CPSC. The lighter weight of the 3-wheel models made them popular with some expert riders. Cornering is more challenging than with a 4-wheeled machine because leaning into the turn is even more important. Operators may roll over if caution isn't used. The front end of 3-wheelers obviously has a single wheel making it lighter, and flipping backwards is a potential hazard, especially when climbing hills. Rollovers may also occur when traveling down a steep incline. The consent decrees expired in 1997, allowing manufacturers to once again make and market 3-wheel models, though there are very few marketed today.
Models continue today to be divided into the sport and utility markets. Sport models are generally small, light, two wheel drive vehicles which accelerate quickly, have a manual transmission, and run at speeds up to 90 miles per hour (145 km/h). Utility models are generally bigger four wheel drive vehicles with a maximum speed of up to 72.5 miles per hour (104 km/h). They have the ability to haul small loads on attached racks or small dump beds. They may also tow small trailers. Due to the different weights, each has advantages on different types of terrain.
Six wheel models often have a small dump bed, with an extra set of wheels at the back to increase the payload capacity. They can be either 4 wheel drive (back wheels driving only), or 6 wheel drive.